BMR Sway bar kit with bushings, front (SB001) and rear (SB003)

BMR swaybars are one of the most noticeable handling improvements you can do for your F-body platform. From the factory, GM did a decent job with spring rates and swaybars but the Camaro begs for more roll resistance. BMR recognizes this need and has a solution that not only increases roll resistance but does so with very minimal decrease in ride quality.

BMR takes advantage of today's technology by manufacturing it's swaybars from tubular steel, a process started in Europe and adopted by most current auto manufacturers today.  All BMR swaybars are cold formed, a manufacturing process that doesn't involve heat, resulting in more consistent "memory" retention.

Countless hours were put into developing and testing the ideal rates for our bars, resulting in a massive 1-3/8" hollow front bar combined with a 1" diameter hollow rear bar. This combination provides a very neutral handling platform that remains stable during aggressive driving maneuvers without sacrificing ride quality. NOTE: Convertible models MAY need to trim or remove the additional front support brace above the steering rack.

Features :

* Hollow front and rear construction provides lighter weight than solid designs

* Polyurethane bushings and end links included

* Cold formed (instead of hot formed) to provide better torsional fatigue resistance