CHEVROLET CORVETTE C7 STINGRAY LT1 6.2L V8 HEARTBEAT SUPERCHARGER SYSTEMS

The most powerful underhood Corvette Supercharger on the market
Magnuson is proud to announce our under the hood Heartbeat supercharger system is now available for the 2014-2017 Chevrolet Corvette C7 Stingray. At just 6 psi, the Heartbeat adds over 120hp to the wheels, to give you over 630 hp at the crank. The new Heartbeat for the C7 Corvette fits completely underhood, requiring no spacers, and allowing you to keep your Stingray hoodliner. There is also no need to remove your front fascia, our unique two piece Low Temperature Radiator allows a simple quick installation.

Run cooler with the most advanced intercooler system available 
Heat soak can be a problem in underhood supercharger systems, robbing more than half the power gain in the summer heat or after a few dragstrip runs. Heartbeat features integrated intercoolers derived from the same technology used in Formula 1 and NASCAR heat exchangers. Unlike other underhood supercharger systems, customers report low IATs and consistent performance all day long.

Bolt on 120+ HP
Magnuson Products supercharger kits are complete with all the components necessary for installation, and Heartbeat fits under the factory hood. Included in the kit is our factory ‘push-lock’ connectors which are utilized in the fuel system for installation ease. Our innovative new two piece heat exchanger means you can install the front-mounted heat exchanger without removing or altering the factory radiator.

Intercooler System

• Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
• Back-to-back testing verifies the intercooler system is superior
• Quick-connect fittings for easier installation

Upgrade Options

• Upgradable throttle body adaptor available for large throttle bodies
• Drive pulley options available for high-boost applications

Included Components

• 6th Generation TVS2300 Heartbeat Supercharger with integral bypass valve
• Patented cast-aluminum high-velocity-port intake manifold
• Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
• Large front-mounted heat exchanger
• All necessary fittings, lines, belts, and hardware required

Warranty

• Standard 3-year/36,000 mile Warranty on the supercharger hardware
• Standard 1-year Limited Warranty on electronics

• Standard Power Train - 3 Year / 36,000 Mile Limited Power Train Warranty
• Optional Power Train - 5 Year / 60,000 Mile Limited Power Train Warranty

Maintenance

• Sealed supercharger rotor assembly requires no maintenance or oil change

Emissions Status

• CARB E.O.# D-488-34

Tools Required

• Metric wrench set
• 1/4in. - 3/8in. and 1/2in. drive metric socket set (Standard and Deep)
• 3/8in.and 1/2in. drive foot-pound and inch-pound torque wrenches
• Belt tensioner wrench
• Phillips and flat-head screwdrivers
• 1/2in. breaker bar
• Fuel line quick disconnect tool (included in kit)
• Small or angled 3/8in. drill
• Drain pan
• Hose cutters
• Hose clamp pliers
• Safety glasses
• Torque angle meter
• Hammer
• Compressed air
• Blow gun air tool
• Metric Allen socket set 3/8in. drive
• Shop vacuum cleaner
• Blue Loctite
• Right Angle drill for pinning crank pulley (when required)
• Helpful Tool: Air or electric impact wrench

Average Installation Time

• 10-12 Hours

Size and Weight

• Number of Boxes: 2
• Box 1 Size: 34"x20"x16"
• Box 1 Weight: 85 lbs.
• Box 2 Size: 27"x14"x18"
• Box 2 Weight: 40 lbs.

Installation Manual
Magnuson 2014+ C7 LT1 HB 6.2L Corvette Supercharger Installation Manual PDF