This kit is highly recommended when installing an aftermarket torque arm to the OEM 10-bolt or similar rear-end using the through bolt design. Supplied with this kit are longer 9/16" Grade 8 bolts to accommodate the thicker torque arm mounting plates. Stock bolts will work however do not have adequate amount of threads which may lead to failure and considered unsafe.
This kit is highly recommended when installing an aftermarket torque arm to the OEM 10-bolt or similar rear-end using the through bolt design. Supplied with this kit are longer 9/16" Grade 8 bolts to accommodate the thicker torque arm mounting plates. Stock bolts will work however do not have adequate amount of threads which may lead to failure and considered unsafe.
Note: This kit will not work with Moser Engineering 12-Bolt rear-ends, you must reuse hardware supplied by Moser Engineering. This kit is recommended for the Moser Engineering 9" rear end.
SKU | UMI3003 |
---|---|
Manufacturer | UMI |
Application Guide | 1993-2002 F-Body |