BTR "Turbo" Camshafts, LS Applications
Regular price $409.99
- Translation missing: en.products.product.price.unit_price
- / Translation missing: en.accessibility.unit_price_separator
BTR "Turbo" Camshafts, LS Applications
BTR STAGE 1 TURBO CAMSHAFT V2- The new BTR Stage 1 Twin Turbo cam was designed to be a versatile camshaft that performs well in a wide range of applications. Developed in house, we went back to the drawing board in search of more power and torque, even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards. Good for 5.3s and 6.0s with cathedral port heads and factory or aftermarket long runner intakes, it also gives great results in LS3 headed applications as well. At the end of the day, if you're hanging a smaller 62-75mm turbo on your LS-based build ,and plan on putting some street miles on it, the Turbo Stage 1 is hard to beat. 217/22X .616"/.616" 113 LSA
BTR STAGE 2 TURBO CAMSHAFT V2- The new BTR Turbo Stage 2 V2 cam was designed to be used in a wide variety of street and strip applications. The old Stage 2 had proven to be an excellent camshaft choice for cathedral port headed 5.3s and 6.0s utilizing a wide range of different turbos. Developed in house, we went back to the drawing board in search of more power and torque ,even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards. Whether you're putting together a budget street build with a small 7275 turbo or aiming for the fences with a Borg Warner S485, this camshaft will make sure the valve events are optimized for your pressurized application. 220/23X .618"/.618" 113 LSA
BTR STAGE 3 TURBO CAMSHAFT V2- The new BTR Turbo Stage 3 V2 cam was designed to bridge the gap between street and strip applications . The old Stage 3 had proven to be an excellent camshaft choice for cathedral port headed 5.3s and 6.0s utilizing a wide range of different turbos. Developed in house, we went back to the drawing board in search of more power and torque ,even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards. Do you have a lightweight setup with a powerglide + 5.3/6.0 that's being pressurized by an S400 (or similar size) turbocharger? If so, this cam will have you lighting the win lamps on race day. 224/23X .618"/.618" 114 LSA
BTR STAGE 4 TURBO CAMSHAFT V2- The new BTR Turbo Stage 4 V2 cam was designed for use in serious effort stock stroke applications spinning over 8000rpm with supporting valvetrain components. For you folks who may have a ~408" bottom end spinning it in the 6400-6800rpm range, this new cam will also be a very good fit. Developed in house, we went back to the drawing board in search of more power and torque ,even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards. Paired to an S400 frame (or similar size), this camshaft will help you move some serious air. Regarded as the BIG STICK of our turbo cam lineup, the Stage 4 is here to knock it out of the park. 227/24X .618"/.618" 115 LSA
BTR 5.3 STOCK BLOCK MAX EFFORT TURBO CAMSHAFT- This BTR 5.3 MAX EFFORT hydraulic roller turbo cam has made upwards of 1650-1700 rwhp when ran in a stock block 5.3 running BTR boost ready 10.5-1 compression forged pistons, BTR prepped TFS 220 cylinder heads, BTR SK703 spring kit, Johnson ST2126LSR lifters and BTR shaft rocker arms. It has been proven to be one of the quickest and fastest stock block 1/8 mile combos in the world. Using a 98mm -102mm turbo, it has run as quick as 4.20s at over 170mph in the 1/8 mile. 23X/25X, .614"/.614", 113.5 LSA
Cancellations: Orders canceled before being shipped will be assessed a 5% cancellation fee. This is to cover the processing fees.
Returns: After 30 days of purchase products cannot be returned. Used products are sold as is and are not returnable. All returns must be made within 30 days of purchase, include original undamaged packaging, and are subject to a 20% restocking fee . To have a return authorized call during normal business hours. Shipping charges are not refunded. After the products installed or used in any way they can not be returned. Refunds usually post within one billing cycle to your account. Contact us for return information and to receive an authorization number. Returns without an authorization number will not be accepted and will be refused for delivery.
Damage Claims: Should you receive a package from us which appears to be damaged, notify the courier or freight company prior to accepting delivery.
Warranty: Products are only warranted by the manufacturer's warranty. All products are for Racing and Performance applications only. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only are are not legal for use on public highways.
Your dealership can not void your warranty for products that do not cause a failure. For legal information in regards to this click here.